My favorite thing to do is to go junking and give new life to discarded materials.We only need to have a little imagination. From this piece of tin, you can make dragonflies, butterflies, angel wings.I want to show you the process you go through to create this particular dragonfly. My dear husband (Honey) and I work on a lot of these projects together and through this journey you will get to know him as well. He is a gifted fabricator of anything metalSmile

DSC07181

Here is how we created this sweet dragonfly!

photo (13)

I start with an antique ceiling tile and use my pattern to trace the wings out on the tile.

photo (10)

Honey cuts the wings out with a cutting torch for me!

photo (11)

Next thing is you need to decide what color you want to paint the wings.

I chose red! I put two coats of paint on each wing.

photo (12)

The possibilities are endless on what you choose to use for the body. I am going to

use an arm off an old rocking chair. Paint it any color that you like.

photo (6)

I used brown as my base and metallic white for the topcoat and distressed it a little.

Before I begin to put it together, I spray a clear sealer for protection.

photo

Lay the body, face down and line your wings up on the back.

Play with different angles to get the look you like.

photo (8)

Start at the top and drill through the wings and continuing slightly

through the wood.  You will attach the hanger with the first screw.

Do not tighten completely because you will want to adjust the angle

of your wings before you drill the second hole. I use two screws per

wing. Make sure to go back and tighten all the screws. My picture of

course is of the last screw. I forgot to take the photo when I startedSmile

photo (5)

I drill a hole for the antennas and use just a dab of gorilla glue to hold

them in place.

photo (4)

The beautiful thing about this type of art, is you can use anything you

have lying around for the body, antennas and eyes. We had a box of these

screws and I loved the look!

photo (7)

Don’t forget to spray the dragonfly again with a good clear sealer.

DSC07181

This is our dragonfly made from repurposed materials. I hope you enjoyed

learning about the process of making  a dragonflySmile They are wonderful for inside

or outside use!